Hard Wired Heat Alarm Recharge

The Kidde KF30R Interconnectable Heat Alarm is a mains-powered heat detector with a rechargeable lithium back-up battery. You don’t need to replace the battery during the alarm’s lifespan. Part of the Firex range, you can link this product with up to 23 other Kidde mains alarms. If one alarm is activated, all other connected alarms will sound. This product is most suitable for humid or dusty areas within your home, such as in kitchens, loft spaces and garages. Comes with a sensor thermistor (Thermal Resistor) within detection unit and a button test which simulates the effect of heat at the sensor, checks electronics and sounder. An automatic self-test circuitry tests the unit and beeps (chirps) if fault is detected. This range requires installation by a professionally qualified electrician and complies with UK Building Regulations for new housing and associated standards (Grade D2 BS 5839, Part 6). Comes with 6 year warranty.

• Model KF30R
• Mains operation and rechargeable lithium back-up battery supplied as standard
• Temperature range 0C to + 40C
• Humidity range Up to 93% relative humidity (RH) non-condensing
• Storage and transport -20C to +60C and 595% relative humidity (RH) non-condensing
• Bracket dimensions 127 x 127 x 39mm
• Alarm dimensions 133 x 133 x 6mm
• Alarm weight 213g
•  
• Supply Voltage 230V AC, 50 Hz
• Power consumption 15mA
• Connection push-in/snap-fit type connector with 150mm long flying leads
• Power-on indicator with continuous green LED
• Alarm sounder electronic piezo-electric sounder, sound output 85dB minimum at 3 metres
• Alarm frequency 3.2 kHz typical
• Alarm Status red LED flashes approximately once every five minutes in normal operation and once a second sensing heat in excess of 58C alarm will also sounds
• SMK4896 surface mounting base for added ease of installation
• Fixing mounting bracket ring supplied with two T slot fitting option 57mm spacing to a maximum of 90mm for standard screw fittings on back boxes, bracket has 50mm diameter central access hole for cabling
• All Firex alarms are lead-free
• Approvals BSI certified to BS5446 Part 2: 2003 and CE tested and certified